en:bpi-r3:wlan
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
en:bpi-r3:wlan [2023/02/12 11:12] – [WLAN] frank | en:bpi-r3:wlan [2023/06/08 17:06] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 15: | Line 15: | ||
and iw shows "(no IR)" after all channels | and iw shows "(no IR)" after all channels | ||
+ | |||
+ | ubuntu does not have the crda tool and so cfg80211 needs the regulatory.db | ||
+ | |||
+ | it can be installed with wireless-regdb or copy regulatory.db and regulatory.db.p7s from https:// | ||
+ | |||
+ | to load the file cfg80211 needs to be compiled as module and it needs the CONFIG_CFG80211_WEXT option (else you get the error " | ||
===== BPI-R3 internal wifi ===== | ===== BPI-R3 internal wifi ===== | ||
Line 795: | Line 801: | ||
interface=wlan0 | interface=wlan0 | ||
- | # | ||
driver=nl80211 | driver=nl80211 | ||
Line 822: | Line 827: | ||
interface=wlan1 | interface=wlan1 | ||
- | # | ||
driver=nl80211 | driver=nl80211 | ||
Line 836: | Line 840: | ||
ieee80211d=1 | ieee80211d=1 | ||
hw_mode=a | hw_mode=a | ||
- | #34-50 step 2 | ||
- | #channel=40 | ||
- | #channel=44 | ||
+ | #34-50 step 2 | ||
channel=36 | channel=36 | ||
+ | # | ||
+ | |||
ieee80211h=1 | ieee80211h=1 | ||
require_vht=1 | require_vht=1 | ||
Line 853: | Line 857: | ||
#channel. | #channel. | ||
+ | #for ch36: | ||
vht_oper_centr_freq_seg0_idx=42 | vht_oper_centr_freq_seg0_idx=42 | ||
+ | #for ch149: | ||
+ | # | ||
#channel=60 | #channel=60 | ||
Line 884: | Line 890: | ||
Leds are not yet working properly (2g4 is mapped by mt76 driver and can be switched on manually but not off,5g led is still missing) | Leds are not yet working properly (2g4 is mapped by mt76 driver and can be switched on manually but not off,5g led is still missing) | ||
+ | |||
+ | === Virtual SSID === | ||
+ | |||
+ | https:// | ||
+ |
en/bpi-r3/wlan.1676196769.txt.gz · Last modified: 2023/06/08 17:06 (external edit)