| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| en:bpi-r3:lte [2022/10/03 13:02] – [change Mode] frank | en:bpi-r3:lte [2023/06/08 17:06] (current) – external edit 127.0.0.1 |
|---|
| APN-settings: https://forum.congstar.de/thread/46325-mobil-surfen-mit-congstar-manuelle-einstellungen-zum-mobilen-internet-apn/ | APN-settings: https://forum.congstar.de/thread/46325-mobil-surfen-mit-congstar-manuelle-einstellungen-zum-mobilen-internet-apn/ |
| |
| | Some information of different interface modes and which modules are required on Openwrt: |
| | https://forum.banana-pi.org/t/bpi-r3-information/12897/83?u=frank-w |
| | |
| | |
| | Openwrt: |
| | |
| | luci-proto-qmi (recommended) or even luci-proto-modemmanager |
| ===== QMI-Mode ===== | ===== QMI-Mode ===== |
| |
| |
| https://gist.github.com/Juul/e42c5b6ec71ce11923526b36d3f1cb2c#connecting-using-mbim | https://gist.github.com/Juul/e42c5b6ec71ce11923526b36d3f1cb2c#connecting-using-mbim |
| | |
| | <code> |
| | qmicli -d /dev/cdc-wdm0 --dms-set-fcc-authentication --device-open-mbim |
| | mbimcli --device=/dev/cdc-wdm0 -p --enter-pin=$PIN1 |
| | mbim-network /dev/cdc-wdm0 start |
| | mbimcli -d /dev/cdc-wdm0 -p --query-ip-configuration |
| | ip addr add 10.22.186.x/30 dev wwan0 |
| | ip link set wwan0 up |
| | ip route add default via 10.22.186.y |
| | ping 8.8.8.8 |
| | mbim-network /dev/cdc-wdm0 stop |
| | </code> |
| ==== first Test ==== | ==== first Test ==== |
| |
| </code> | </code> |
| |
| | got a connection in MBIM-Mode: |
| | <code> |
| | root@bpi-r3:~# qmicli -d /dev/cdc-wdm0 --dms-set-fcc-authentication --device-open-mbim |
| | [/dev/cdc-wdm0] Successfully set FCC authentication |
| | root@bpi-r3:~# mbimcli --device=/dev/cdc-wdm0 -p --enter-pin=1234 |
| | [/dev/cdc-wdm0] PIN operation successful |
| | |
| | [/dev/cdc-wdm0] PIN info: |
| | PIN state: 'locked' |
| | PIN type: 'pin2' |
| | Remaining attempts: '3' |
| | root@bpi-r3:~# mbim-network /dev/cdc-wdm0 start |
| | Loading profile at /etc/mbim-network.conf... |
| | APN: internet.telekom |
| | APN auth protocol: PAP |
| | APN user: congstar |
| | APN password: cs |
| | mbim-proxy: yes |
| | Querying subscriber ready status 'mbimcli -d /dev/cdc-wdm0 --query-subscriber-ready-status --no-close --device-open-proxy'... |
| | [/dev/cdc-wdm0] Subscriber ready status retrieved: Ready state: 'initialized' Subscriber ID: '262017041684242' SIM ICCID: '89490200001355851497' Ready info: 'none' Telephone numbers: (1) '+4915120251510' [/dev/cdc-wdm0] Session not closed: TRID: '4' |
| | Saving state at /tmp/mbim-network-state-cdc-wdm0... (TRID: 4) |
| | Querying registration state 'mbimcli -d /dev/cdc-wdm0 --query-registration-state --no-open=4 --no-close --device-open-proxy'... |
| | [/dev/cdc-wdm0] Registration status: Network error: 'unknown' Register state: 'home' Register mode: 'automatic' Available data classes: 'lte' Current cellular class: 'gsm' Provider ID: '26201' Provider name: 'congstar' Roaming text: 'unknown' Registration flags: 'packet-service-automatic-attach' [/dev/cdc-wdm0] Session not closed: TRID: '6' |
| | Saving state at /tmp/mbim-network-state-cdc-wdm0... (TRID: 6) |
| | Attaching to packet service with 'mbimcli -d /dev/cdc-wdm0 --attach-packet-service --no-open=6 --no-close --device-open-proxy'... |
| | Saving state at /tmp/mbim-network-state-cdc-wdm0... (TRID: 8) |
| | Starting network with 'mbimcli -d /dev/cdc-wdm0 --connect=apn='internet.telekom',auth='PAP',username='congstar',password='cs' --no-open=8 --no-close --device-open-proxy'... |
| | Network started successfully |
| | Saving state at /tmp/mbim-network-state-cdc-wdm0... (TRID: 11) |
| | root@bpi-r3:~# ip a s wwan0 |
| | 11: wwan0: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 |
| | link/ether 3e:06:6b:05:0a:17 brd ff:ff:ff:ff:ff:ff |
| | root@bpi-r3:~# mbimcli -d /dev/cdc-wdm0 -p --query-ip-configuration |
| | |
| | [/dev/cdc-wdm0] IPv4 configuration available: 'address, gateway, dns, mtu' |
| | IP [0]: '10.153.121.ip/29' |
| | Gateway: '10.153.121.gw' |
| | DNS [0]: '10.74.210.210' |
| | DNS [1]: '10.74.210.211' |
| | MTU: '1500' |
| | |
| | [/dev/cdc-wdm0] IPv6 configuration available: 'address, gateway, dns, mtu' |
| | IP [0]: '2a01:598:808c:ba9c:c4e4:7a88:29ea:xxxx/64' |
| | Gateway: '2a01:598:808c:ba9c:93d:409b:3ddb:ee7' |
| | DNS [0]: '2a01:598:7ff:0:10:74:210:210' |
| | DNS [1]: '2a01:598:7ff:0:10:74:210:211' |
| | MTU: '1500' |
| | root@bpi-r3:~# ip a s wwan0 |
| | 11: wwan0: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 |
| | link/ether 3e:06:6b:05:0a:17 brd ff:ff:ff:ff:ff:ff |
| | root@bpi-r3:~# ip addr add 10.153.121.ip/29 dev wwan0 |
| | root@bpi-r3:~# ip link set wwan0 up |
| | [ 357.976946] 8021q: adding VLAN 0 to HW filter on device wwan0 |
| | root@bpi-r3:~# ip route add default via 10.153.121.gw |
| | root@bpi-r3:~# ip r |
| | default via 10.153.121.gw dev wwan0 |
| | 10.153.121.net/29 dev wwan0 proto kernel scope link src 10.153.121.ip |
| | root@bpi-r3:~# ping 8.8.8.8 |
| | PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. |
| | 64 bytes from 8.8.8.8: icmp_seq=1 ttl=113 time=210 ms |
| | 64 bytes from 8.8.8.8: icmp_seq=2 ttl=113 time=30.6 ms |
| | 64 bytes from 8.8.8.8: icmp_seq=3 ttl=113 time=83.7 ms |
| | ^C |
| | --- 8.8.8.8 ping statistics --- |
| | 3 packets transmitted, 3 received, 0% packet loss, time 2002ms |
| | rtt min/avg/max/mdev = 30.566/108.191/210.347/75.416 ms |
| | root@bpi-r3:~# |
| | </code> |
| ===== change Mode ===== | ===== change Mode ===== |
| |
