linux:lte
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Nächste Überarbeitung | Vorhergehende Überarbeitung | ||
linux:lte [2022/09/17 15:06] – angelegt frank | linux:lte [2023/06/08 17:06] (aktuell) – Externe Bearbeitung 127.0.0.1 | ||
---|---|---|---|
Zeile 19: | Zeile 19: | ||
APN-Einstellungen: | APN-Einstellungen: | ||
https:// | https:// | ||
+ | |||
+ | ===== erster Test ===== | ||
+ | |||
+ | < | ||
+ | / | ||
+ | APN=internet.v6.telekom | ||
+ | PROXY=yes | ||
+ | |||
+ | root@bpi-r3: | ||
+ | [/ | ||
+ | Device type: ' | ||
+ | | ||
+ | Voice class: ' | ||
+ | SIM class: ' | ||
+ | Data class: 'umts, hsdpa, hsupa, lte' | ||
+ | SMS caps: ' | ||
+ | Ctrl caps: ' | ||
+ | Max sessions: ' | ||
+ | Custom data class: ' | ||
+ | Device ID: ' | ||
+ | Firmware info: ' | ||
+ | Hardware info: ' | ||
+ | root@bpi-r3: | ||
+ | Loading profile at / | ||
+ | APN: internet.v6.telekom | ||
+ | APN auth protocol: unset | ||
+ | APN user: unset | ||
+ | APN password: unset | ||
+ | mbim-proxy: yes | ||
+ | Querying subscriber ready status ' | ||
+ | ady-status --no-close --device-open-proxy' | ||
+ | [/ | ||
+ | Subscriber ID: ' | ||
+ | lephone numbers: (0) ' | ||
+ | Saving state at / | ||
+ | Querying registration state ' | ||
+ | | ||
+ | [/ | ||
+ | eregistered' | ||
+ | t cellular class: ' | ||
+ | text: ' | ||
+ | wdm0] Session not closed: TRID: ' | ||
+ | Saving state at / | ||
+ | Attaching to packet service with ' | ||
+ | ce --no-open=6 --no-close --device-open-proxy' | ||
+ | error: operation failed: PinRequired | ||
+ | Saving state at / | ||
+ | Starting network with ' | ||
+ | om' --no-open=8 --no-close --device-open-proxy' | ||
+ | error: operation failed: PinRequired | ||
+ | Network start failed | ||
+ | [/ | ||
+ | Saving state at / | ||
+ | root@bpi-r3: | ||
+ | |||
+ | so it looks like pin-problem and i tried this: | ||
+ | |||
+ | root@bpi-r3: | ||
+ | [/ | ||
+ | | ||
+ | [/ | ||
+ | PIN state: ' | ||
+ | PIN type: ' | ||
+ | Remaining attempts: ' | ||
+ | root@bpi-r3: | ||
+ | Loading profile at / | ||
+ | APN: internet.v6.telekom | ||
+ | APN auth protocol: unset | ||
+ | APN user: unset | ||
+ | APN password: unset | ||
+ | mbim-proxy: yes | ||
+ | Loading previous state from / | ||
+ | Previous Transaction ID: 10 | ||
+ | error: no actions specified | ||
+ | Clearing state at / | ||
+ | Querying subscriber ready status ' | ||
+ | [/ | ||
+ | TRID: ' | ||
+ | Saving state at / | ||
+ | Querying registration state ' | ||
+ | | ||
+ | [/ | ||
+ | text: ' | ||
+ | Saving state at / | ||
+ | Attaching to packet service with ' | ||
+ | error: operation failed: RadioPowerOff | ||
+ | Saving state at / | ||
+ | Starting network with ' | ||
+ | error: operation failed: RadioPowerOff | ||
+ | Network start failed | ||
+ | [/ | ||
+ | Saving state at / | ||
+ | root@bpi-r3: | ||
+ | </ | ||
+ | |||
+ | ===== Mode umstellen ===== | ||
+ | |||
+ | Achtung: danach ging erstmal nichts mehr | ||
+ | |||
+ | root@bpi-r3: | ||
+ | [/ | ||
+ | USB composition 6: DM, NMEA, AT, QMI | ||
+ | [*] USB composition 8: DM, NMEA, AT, MBIM | ||
+ | USB composition 9: MBIM | ||
+ | |||
+ | root@bpi-r3: | ||
+ | |||
+ | von nun an wurde kein device mehr erkannt (auch kein serial ttyUSBx o.ä.) und ich habe in der dmesg nur noch das gesehen (auch nach cold-reset): | ||
+ | |||
+ | [ 3.592655] usb 1-1.1: new high-speed USB device number 4 using xhci-mtk | ||
+ | [ 3.823392] usb 1-1.1: config 1 has an invalid interface number: 8 but max is 3 | ||
+ | [ 3.830719] usb 1-1.1: config 1 has no interface number 1 | ||
+ | |||
+ | ich habe auch alle mir bekannten module geladen: | ||
+ | |||
+ | root@bpi-r3: | ||
+ | root@bpi-r3: | ||
+ | root@bpi-r3: | ||
+ | |||
+ | mit dem Trick habe ich aber zugriff auf das AT-Interface bekommen: | ||
+ | |||
+ | lsusb: | ||
+ | |||
+ | Bus 001 Device 004: ID 413c:81c2 Dell Computer Corp. DW5811e Snapdragon™ X7 LTE | ||
+ | |||
+ | mit dem option-modul konnte ich die ttyUSB freischalten: | ||
+ | |||
+ | root@bpi-r3: | ||
+ | [ 229.747728] usbcore: registered new interface driver option | ||
+ | [ 229.753429] usbserial: USB Serial support registered for GSM modem (1-port) | ||
+ | |||
+ | root@bpi-r3: | ||
+ | [ 300.293186] option 1-1.1:1.0: GSM modem (1-port) converter detected | ||
+ | [ 300.299755] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0 | ||
+ | [ 300.307011] option 1-1.1:1.2: GSM modem (1-port) converter detected | ||
+ | [ 300.313657] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1 | ||
+ | [ 300.320968] option 1-1.1:1.3: GSM modem (1-port) converter detected | ||
+ | [ 300.327741] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2 | ||
+ | [ 300.336533] option 1-1.1:1.8: GSM modem (1-port) converter detected | ||
+ | [ 300.343262] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB3 | ||
+ | |||
+ | hier nur noch via minicom -D / | ||
+ | |||
+ | < | ||
+ | ATE1 | ||
+ | |||
+ | OK | ||
+ | |||
+ | AT!ENTERCND=" | ||
+ | |||
+ | OK | ||
+ | |||
+ | AT!CUSTOM? | ||
+ | |||
+ | !CUSTOM: | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | |||
+ | OK | ||
+ | |||
+ | AT!USBCOMP? | ||
+ | |||
+ | Config Index: 1 | ||
+ | |||
+ | Config Type: 1 (Generic) | ||
+ | |||
+ | Interface bitmask: 0020010D (diag, | ||
+ | |||
+ | |||
+ | OK | ||
+ | |||
+ | AT!USBCOMP=? | ||
+ | |||
+ | !USBCOMP: | ||
+ | |||
+ | AT!USBCOMP=< | ||
+ | |||
+ | <Config Index> | ||
+ | |||
+ | |||
+ | <Config Type> | ||
+ | |||
+ | config type 2/3 should only be used for specific Sierra | ||
+ | |||
+ | customized VID/PID should use config type 1 | ||
+ | |||
+ | |||
+ | < | ||
+ | |||
+ | NMEA - 0x00000004, | ||
+ | |||
+ | MODEM - 0x00000008, | ||
+ | |||
+ | RMNET0 | ||
+ | |||
+ | RMNET1 | ||
+ | |||
+ | MBIM - 0x00001000, | ||
+ | |||
+ | e.g. | ||
+ | |||
+ | 10D - diag, nmea, modem, rmnet interfaces enabled | ||
+ | |||
+ | 1009 - diag, modem, mbim interfaces enabled | ||
+ | |||
+ | |||
+ | The default configuration is: | ||
+ | |||
+ | at!usbcomp=1, | ||
+ | |||
+ | |||
+ | OK | ||
+ | </ | ||
+ | leider ließ sich der default-mode nicht setzen |
linux/lte.1663419987.txt.gz · Zuletzt geändert: 2023/06/08 17:06 (Externe Bearbeitung)