Differences

This shows you the differences between two versions of the page.

--- en:bpi-r3mini:start [2024/04/19 18:08] – [network support] frank
+++ en:bpi-r3mini:start [2024/04/21 19:16] – [network support] frank
@@ Line 147: / Line 147: @@
 This is fixed in my 2024-04 uboot by always run autonegotiation code (genphy code seems not working here).
-Writing firmware to emmc boot1 (untested):
+Writing firmware to emmc boot1:
 <code>
+usb start
 mmc partconf 0 1 2 2
 mmc erase 0x0 0x120
@@ Line 154: / Line 155: @@
 mmc write $loadaddr 0x0 0x20
 load usb 0:1 $loadaddr EthMD32.DSP.bin
-mmc write $loadaddr 0x0 0x100
+mmc write $loadaddr 0x20 0x100
 mmc partconf 0 1 1 0
 </code>
+daniel wrote it here: https://forum.banana-pi.org/t/bpi-r3-mini-boot-from-nand-fails/17340/27
 Linux way:
@@ Line 164: / Line 167: @@
 dd if=/lib/firmware/airoha/EthMD32.DSP.bin bs=16384 seek=1 of=/dev/mmcblk0boot1
 </code>
+<hidden>
+checking content of boot1 is same as concatenated firmware-files:
+<code>
+# cat /dev/mmcblk0boot1 > airoha_boot1.bin
+# cat /mnt/r3mini/EthMD32.dm.bin /mnt/r3mini/EthMD32.DSP.bin > airoha_usb.bin
+# ls -l airoha_usb.bin
+-rw-r--r-- 1 root root 147456 Jan  1 00:03 airoha_usb.bin
+# ls -l airoha_boot1.bin
+-rw-r--r-- 1 root root 4194304 Jan  1 00:00 airoha_boot1.bin
+# truncate --size=147456 airoha_boot1.bin
+# ls -l airoha_boot1.bin
+-rw-r--r-- 1 root root 147456 Jan  1 00:05 airoha_boot1.bin
+# diff -u airoha_boot1.bin airoha_usb.bin
+#
+</code>
+</hidden>
 ==== Fix bricked boot ====