User Tools

Site Tools


en:bpi-r2:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:bpi-r2:start [2019/01/19 17:49]
frank [known Issues / Limitation]
en:bpi-r2:start [2019/07/12 16:56] (current)
frank
Line 20: Line 20:
     * [[Kernel]]/​[[Uboot]] (debian):     * [[Kernel]]/​[[Uboot]] (debian):
       * 4.4.70 on [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp|GitHub]]       * 4.4.70 on [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp|GitHub]]
-      * 4.14,​4.16,​4.17 ​on [[https://​github.com/​frank-w/​BPI-R2-4.14|my GitHub]]+      * 4.14on [[https://​github.com/​frank-w/​BPI-R2-4.14|my GitHub]]
       * [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp-4.14|official 4.14]]       * [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp-4.14|official 4.14]]
       * precompiled Kernel on my [[https://​drive.google.com/​drive/​folders/​15Y5Y3NAOwg_IMmN3k6hdb7pAQj9oTVTl?​usp=sharing|GDrive]]       * precompiled Kernel on my [[https://​drive.google.com/​drive/​folders/​15Y5Y3NAOwg_IMmN3k6hdb7pAQj9oTVTl?​usp=sharing|GDrive]]
Line 38: Line 38:
  
 ===== known Issues / Limitation ===== ===== known Issues / Limitation =====
-  * on-board-WLAN ([[http://​forum.banana-pi.org/​t/​2-4ghz-and-5-6ghz-wifi-working-fine/​3844|AP-Mode working so far]]),​[[https://​github.com/​frank-w/​BPI-R2-4.14|4.14]] + 4.19 + 5.0 +  * on-board-WLAN ([[http://​forum.banana-pi.org/​t/​2-4ghz-and-5-6ghz-wifi-working-fine/​3844|AP-Mode working so far]]),​[[https://​github.com/​frank-w/​BPI-R2-4.14|4.14 + 4.19 + 5.x]] 
-  * bluetooth working (beta) in 4.14 + 4.19 +  * bluetooth working (beta) in 4.14 + 4.19 (except btle) 
-  * BPi-R2 does not power-off: [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp/​issues/​16|GitHub]] (working in 4.14+4.19+5.0)+  * BPi-R2 does not power-off: [[https://​github.com/​BPI-SINOVOIP/​BPI-R2-bsp/​issues/​16|GitHub]] (working in 4.14+4.19+5.x)
   * Switch 7530 Port-separation/​vlan in 4.4.x not supported, in 4.14+ vlan+separation works   * Switch 7530 Port-separation/​vlan in 4.4.x not supported, in 4.14+ vlan+separation works
-  * 2nd GMAC works pn 4.14+4.19+  * 2nd GMAC works pn 4.14+4.19, in 5.x this is only available on phylink-branches
  
 ~~PDFNS>​en:​bpi-r2|BananaPi-R2_EN_FW-WEB-Wiki~~ ~~PDFNS>​en:​bpi-r2|BananaPi-R2_EN_FW-WEB-Wiki~~
en/bpi-r2/start.txt · Last modified: 2019/07/12 16:56 by frank