User Tools

Site Tools



en:bpi-r2:hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en:bpi-r2:hardware [2018/07/30 20:32] – [Hardware] franken:bpi-r2:hardware [2023/06/08 17:06] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== Hardware ======
 +  * [[debug-uart|Debug-UART]]
 +  * power-on: hold power-switch 10 seconds, without power-switch: [[http://forum.banana-pi.org/t/bpi-r2-boot-power-suppy/3647/47|Forum]]
 +    * solder bridge next to power switch. Can cause problems since poweroff-feature. To fix this blacklist pmic-keys-module or uninstall acpid package see [[https://github.com/frank-w/BPI-R2-4.14/issues/35|issue 35]]
 +    * input 5V to OTG
 +  * poweroff (4.14.53+) needs acpid package for power-button (command works without it)
 +    * http://forum.banana-pi.org/t/bpi-r2-already-has-an-on-board-rtc/5347/31
 +  * [[storage|emmc]]: [[http://forum.banana-pi.org/t/bpi-r2-new-image-openwrt-lede-2017-09-08/3797/10|Forum]]
 +    * emmc on v1.2 is maybe from vendor SEC which needs different pinctrl setting (pu/pd) in uboot to be recognized: [[https://forum.banana-pi.org/t/problem-trying-to-use-emmc/11253|forum]] issue was introduced in u-boot 2022.04 and fixed with patch from daniel (for 2023.07)
 +  * wifi-chip onBoard: MT6625 [[http://forum.banana-pi.org/t/support-onboard-wifi-module-mt6625-in-linux-kernel-4-4-70/3718/|Forum (dev)]] [[http://forum.banana-pi.org/t/2-4ghz-and-5-6ghz-wifi-working-fine/3844/|Forum (usr)]]
 +  * Switch-Chip onBoard: MT7530 [[http://forum.banana-pi.org/t/bpi-r2-ethernet-switch/4134/|Forum]]
 +  * [[GPIO]]
 +
 +
 +{{ :bpi-r2:img_20170915_121142_dsc_1002_.jpg?direct&200 |}}
 +===== additional hardware =====
 +
 +  * Power-supply: 12V/2A recommended,plug coaxial: 2,1 x 5,5 mm [[https://www.reichelt.de/Festspannungsnetzteile/GS25E12-P1J/3/index.html?ACTION=3&ARTICLE=161621|Reichelt]]
 +  * microSD-card (>=8GB): Sandisk Ultra 32GB
 +  * WLAN-antennas: 5dBi mit rp-SMA auf IPEX/u-FL Kabel
 +  * PCIe wifi-card: [[http://forum.banana-pi.org/t/ac-wlan-pcie-card/|Forum]] => [[wlan#mt76|MT76]]
 +  * case:
 +    * official: [[http://forum.banana-pi.org/t/banana-pi-bpi-r2-premium-aluminum-enclosure/4119|alu-case]],[[http://forum.banana-pi.org/t/banana-pi-bpi-r2-arcylic-case/4283?source_topic_id=4119|acrylic case]]
 +    * inofficial [[http://forum.banana-pi.org/t/3d-designed-case-for-r2/3906|files for 3D Printer]]
 +  * heatsinks:
 +    * mt7623: 20x20mm
 +    * mt7530: 14x14mm (like rpi soc)
 +===== cables =====
 +
 +==== wifi ====
 +
 +  * rp-SMA to IPEX/u-FL cable for wifi-antennas
 +
 +{{:bpi-r2:wifi-connector.jpg?direct&200|}}
 +==== SATA ====
 +
 +  * [[https://m.ebay.de/itm/Micro-JST-2-54mm-2-3-4Pin-Stecker-Buchse-Stecker-Stecker-Crimps-x-60-SETS/252846562355|2,54mm XH 2pin/4pin]] for SATA power [[http://www.ebay.de/itm/Banana-Pi-SATA-Daten-und-Stromkabel-Kabel-/263090662637?hash=item3d416ceced:g:pyIAAOSwRvdZaqdc|or 2-Pin combined with SATA]]
 +
 +{{:bpi-r2:sata_power.jpg?direct&50|}}
 +
 +it works with GND next to power (1+2,3+4). 12V is yellow, 5V is red
 +
 +both jacks near sata-connector have voltage, also if R2 is "halted", the fan-jack (near IR-receiver) had no direct-current output in my tests (4.14), this seems my gnd there is broken...with another gnd i have the 5V output
 +==== battery ====
 +
 +  * <del>1,25mm SH 6pin for battery [[https://de.aliexpress.com/item/Free-shipping-10PCS-Single-End-SH-Pitch-1-25mm-15cm-28AWG-0-36cm-Micro-Wire-To/32801094713.html|AliExpress]], no circuit known</del> battery-connector does not work [[http://forum.banana-pi.org/t/battery-cable-circuit/3737/9|see here]]
 +
 +===== mount =====
 +  * wifi mPCIe-card bolted with M2x10 screws and knurled nut + 2 x washers of Polyamid (isolation+protection of the board)